63
DRIVE CHAIN LUBRICATION
The drive chain should be lubricated every 250 miles and after riding
through rain, on wet roads, or any time the chain appears dry.
Janus recommends the use of Spectro® Super Clean Chain Lube.
Apply chain lubricant to to the sides of the rollers. This allows the
lubricant to penetrate the to chain rollers and bushings. Wipe off any
excess lubricant.
WARNING: Care should be taken that excess lubricant does not
come in contact with the tires or brake pads and rotors. Any oil or
lubricant on the tires will reduce their ability to maintain traction
and may reduce their ability to corner or stop leading to loss of
control and an accident. Lubricant or oil on the brake rotors will
greatly reduce their ability to function properly and may increase
stopping distancespotentially leading to loss of control and an
accident. If you notice any oil on the brake rotors or pads, clean
them with a proprietary oil-free brake disc cleaner.
To Next Page
Loading...