EasyManua.ls Logo

Janus 250 Series - Page 65

Janus 250 Series
96 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
65
BRAKE PAD WEAR COMPENSATION
Disc and brake pad wear is automatically compensated for by the
caliper and no mechanicaladjustment is necessary. However, the brake
fluid level may lower slightly over time.Check and top up brake fluid in
accordance with theperiodicmaintenance schedule.
BRAKE LIGHT SWITCHES
The brake light is activatedindependently by operation of either the
front or rear brake. If the brake light fails to operate with either front
or rear brake activatedindependently, do not ride the motorcycle and
have it serviced byqualified motorcycle mechanic.
WARNING: Operating the motorcycle with defective lights is both
illegal and highly dangerous and may lead toaccident or injury to
the rider or other motorists. 
CHECKING BRAKE FLUID
Check the level and replace the brake fluid on both front and rear
reservoirs in accordance with the periodic maintenance schedule.Use
only DOT 3 or DOT 4 brake fluid from anunopened container.
The brake fluid level in the front and rear reservoirs must be kept
between the “LOWER” and“UPPER” line on the side ofthe reservoir.
If the brake fluid level is below theLOWER” level line, check for leaks in
the brake lines and at the calipers and fill the reservoir to the“UPPER”
level line.

Related product manuals