EasyManua.ls Logo

Janus 250 Series - Page 74

Janus 250 Series
96 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
74
TIRES, CON’T.
TIRE REPLACEMENT
Janus motorcycles are designed for use with a specific make and
model of tire. It is essential that the approved tires are fitted in the
correct combinations. Use of incorrect tires or correct tires in the
wrong combinations or improperly installed may lead to motorcycle
instability, loss of control and an accident.Janus Motorcycles cannot
assume any responsibility for damage or accidents resulting from
incorrect tire selection or installation.
NOTE: If a tire or inner tube sustains damage or a puncture, the
tire and inner tube must be replaced together. Never use a new
tire with an old tube.
NOTE: Tires have a correct direction of rotation marked on
the sidewall. Installing tires with the incorrect direction of
rotation is dangerous and can leadto instability, loss of control
and an accident. Always have your tiresmounted by a qualified
motorcycle mechanic.
TIRE & INNER TUBE DATA
WARNING: Tires that have been damaged or punctured and
repaired do not have the same capabilities as undamaged tires
and can suddenly fail resultingin loss of control and an accident.
WARNING: Tire failure on a motorcycle is much more dangerous
than on a car. For this reason,replace motorcycle tires well before
they have been worn to their minimum.
WARNING: When tires are damaged orpunctured, tire pressure
loss can often be very slow. Always check tire pressure and inspect
tires very closely forpunctures prior to riding. Check the tires for
cuts or imbedded objects. Operation with damaged orpunctured
tires willadversely affect handling and may lead to loss of control
and an accident.
TIRE DATA
FRONT TIRE Duro HF317 3.00 X 18
REAR TIRE Duro HF314 3.50 X 18
INNER TUBES DATA
FRONT TUBE Heavy Duty 18in X 2.75in / 3.00in
REAR TUBE Heavy Duty 18in X 3.25in / 3.50in

Related product manuals