Page: 114
FM-200® OPERATION, DESIGN, & SERVICE MANUAL
Revision F
Document # DOC102
Issued: February 1, 2009
Revised: 11-Nov-2011
40YE
Table D.1 - Lockout Valve Ordering Information
P/N Valve Size Description (see below for options)
Nominal Weight
lb (kg)
19465 1/2” Ball Valve, Manually Actuated 1.9 (0.9)
19466 3/4” Ball Valve, Manually Actuated 2.7 (1.2)
19467 1” Ball Valve, Manually Actuated 4.8 (2.2)
19468 1-1/2” Ball Valve, Manually Actuated 9.8 (4.4)
19469 2” Ball Valve, Manually Actuated 12.7 (5.8)
19470 3” Wafer Valve, 830 Series, Manually Actuated 23.0 (10.3)
19471 4” Wafer Valve, 830 Series, Manually Actuated 32.0 (14.3)
19472 6” Wafer Valve, 830 Series, Manually Actuated 69.0 (30.8)
19473 8” Wafer Valve, 830 Series, Manually Actuated 107.0 (48.8)
Ordering Instructions: Specify the Valve P/N followed by a dash and the appropriate
three digit option code as illustrated below.
Examples:
19465-C00 – 1/2” Ball Valve, Carbon Steel
19467-SL0 – 1” Ball Valve, with Limit Switch, Stainless Steel
XXXXX-XXX
P/N as indicated above
0 = Standard
L = w/ Limit Switch
C = Carbon Steel
S = Stainless Steel
0 = Standard
E = Extended Stem
Appendix D
To Next Page
Loading...