Janus FM-200 Sv Series - Sample Equipment Order List

Page: 46
FM-200® OPERATION, DESIGN, & SERVICE MANUAL
Revision F
Document # DOC102
Issued: February 1, 2009
Revised: 11-Nov-2011
40YE
Section 3 System Design
Sample Sv Series Single Cylinder Equipment Order List
Quantity P/N Description
1 18584-065 Cylinder Assembly, FM-200, 80 lb
65 lbs FM200AGENT FM-200® Agent
1 18595 Bracket Assembly, Cylinder, 10”
1 18481 Electric Valve Actuator
1 17001 Manual Valve Actuator
As Required Various Discharge Nozzles
1 18773 Switch, Discharge Pressure, w/ 1/2” (15 mm) Conduit Connection
1 18489 Sign, Warning, Exit, Clean Agent
1 18770 Sign, Warning, Entrance, Clean Agent
Sample Sv Series Three Cylinder Equipment Order List
Quantity P/N Description
3 18584-050 Cylinder Assembly, FM-200, 80 lb
150 lbs FM200AGENT FM-200® Agent (50 lbs per Cylinder)
3 18595 Bracket Assembly, Cylinder, 10”
1 18481 Electric Valve Actuator
1 17001 Manual Valve Actuator
2 17019 Pneumatic Valve Actuator
1 18624
Bushing, 3/8” MNPT x 1/4” FNPT (10 mm x 8 mm), Brass
Pilot Actuation Adapter
1 18560
Valve, Check, 1/4” MNPT x 1/4” JIC Male (8 mm x 8 mm), Brass
Pilot Actuation Check Valve
2 18648 Hose, Flex, 3/16”, 1/4” (8 mm) JIC Female - 16” (406 mm)
1 18622
Tee, 1/4” JIC Male x 1/4” MNPT (8 mm x 8 mm), Brass
Pilot Actuation Mid Line Tee
1 18625
Adapter, 1/4” MNPT x 1/4” JIC Male (8 mm x 8 mm), Brass
Male NPT Adapter
1 18611
Tee, 1/4” FNPT x 1/4” MNPT (8 mm x 8 mm), Brass
Pilot Actuation End Line Tee
1 10173 Vent Check
As Required Various Discharge Nozzles
1 18773 Switch, Discharge Pressure, w/ 1/2” (15 mm) Conduit Connection
3 18547 Valve, Check, 1-1/4” FNPT (32 mm)
1 18489 Sign, Warning, Exit, Clean Agent
1 18770 Sign, Warning, Entrance, Clean Agent
3.8 Sample Equipment Order List