Page: 106
MV & LV SERIES ENGINEERED DRY CHEMICAL FIRE EXTINGUISHING SYSTEM
OPERATION, DESIGN, & SERVICE MANUAL
REV C
Document # DOC324
Issued: April 26, 2018
Revised: March 22, 2022
UL FILE # EX27541
Appendix A
Page 3 of 12 Pages
ABC
Cut-off Levels
magnesium aluminum silicate
potassium aluminum silicate
methyl hydrogen polysiloxane
Amorphous silica
precipitated synthetic zeolite
Yellow 14 pigment – di-azo dye
Eye Exposure: May cause irritation. Irrigate eyes with water and
repeat until pain free. Seek medical attention if
irritation develops, or if vision changes occur.
Skin Exposure: May cause skin irritation. In case of contact, wash
with plenty of soap and water. Seek medical attention
if irritation persists.
Inhalation: May cause irritation, along with coughing. If
respiratory irritation or distress occurs, remove victim
to fresh air. Seek medical attention if irritation
persists.
Ingestion: Overdose symptoms may include numbness or
tingling in hands or feet, uneven heart rate, paralysis,
feeling faint, chest pain or heavy feeling, pain
spreading to the arm or shoulder, nausea, diarrhea,
sweating, general ill feeling, or seizure (convulsions).
If victim is conscious and alert, give 2-3 glasses of
water to drink. If conscious, do not induce vomiting.
Seek immediate medical attention. Do not leave
victim unattended. To prevent aspiration of
swallowed product, lay victim on side with head lower
than waist.
Medical conditions possibly
aggravated by exposure: Inhalation of product may aggravate existing chronic
respiratory problems such as asthma, emphysema, or
bronchitis. Skin contact may aggravate existing skin
disease. Chronic overexposure may cause
pneumoconiosis (“dusty lung” disease).
Section 4. FIRST AID MEASURES
To Next Page
Loading...
Need help?
General