Jar Furniture HALO User Manual

Assembly Instructions
HALO
Queen Size Upholstered Bed
Ver1.1

Jar Furniture HALO Specifications

General

Brand	Jar Furniture
Model	HALO
Category	Indoor Furnishing
Language	English

Summary

General Assembly Precautions

Follow Basic Assembly Steps

Adhere to general guidelines for careful assembly, including checking parts, identifying components, and proper screw tightening.

Parts and Tools Identification

Required Tools and Components

Lists Phillips Head Screwdriver, bed components (P1-P8), and hardware (H1-H10) with quantities.

Step 1: Attach Bed Legs

Securing Bed Legs (P7)

Attach bed legs to the frame using JCBB screws (H2) and washers (H5, H6).

Step 2: Assemble Frame Sides

Connecting Headboard and Footboard to Side Rails

Join headboard (P1) and footboard (P2) to side rails (P3) using JCBB screws (H1) and washers (H5, H6).

Step 3: Attach Center Rail

Installing Center Rail (P4)

Attach the center rail (P4) to the side rails (P3) using JCBC screws (H4) and washers (H5, H7).

Step 4: Install Support Leg

Securing Support Leg to Center Rail

Attach the support leg (P6) to the center rail (P4) using JCBC screws (H3) and washers (H5, H6).

Step 5: Screw Slats

Attaching Slats (P5) with JCBC Screws

Secure slats (P5) to the side rails using JCBC screws (H4) and washers (H5, H7).

Step 6: Screw Slats

Attaching Slats (P5) with CSK Screws

Secure slats (P5) to the side rails using CSK screws (H8).