Jasic TIG Series - Technical Specifications

10
TECHNICAL SPECIFICATIONS
Please Note
Due to variaons in manufactured products all claimed performance rangs, capacies, measurements,
dimensions and weights quoted are approximate only. Achievable performance and rangs when in use
can depend upon correct installaon, applicaons and use along with regular maintenance and service.
Technical Parameter Unit TIG 300P
Rated input voltage V AC 400V +/- 15%50/60HZ
Input current Ie A 9.9
Input Power kVA 9.5 TIG / 8.5MMA
MMA output characteriscs
Current output range A 20 ~ 210
Arc force current range A 0 ~ 60
Hot start current range A 0 ~ 60
No load current V 60
VRD voltage V 11.8
TIG output characteriscs
Current output range A 5 – 300
No load voltage V 60
Inial current range A 5 ~ 300
Crater current range A 5 ~ 300
Peak current range A 5 ~ 300
Base current range A 5 ~ 300
Pulse frequency range Hz 0.5 ~ 200
Pulse duty cycle % 10 ~ 90
Pre ow me S 0 ~ 15
Post ow me S 0.5 ~ 15
Upslope me S 0 ~ 10
Downslope me S 0 ~ 10
Spot welding me S 0.1 ~ 10
Arc ignion methods - HF and li arc start
Duty cycle
MMA
%
210 @ 50
TIG 300 @ 20
Overall eciency % 85
Housing protecon grade IP 23S
Power factor cosφ 0.84
Insulaon grade - F
Standard IEC60974-1
Noise Db <70
Humidity % ≤90 (no condensaon of water drops)
Temperature Range
Storage temperature °C -10° ~ 40°
Operang temperature °C -25° ~ 55°
Size
Power source only
mm
566 x 224 x 405
Water cooled package 940 x 420 x 1130
Weight
Power source only
Kg
19.4
Water cooled package 74
Remote control opon Yes