Jasic TIG Series - MMA Welding Setup; TIG Welding Setup

18
INSTALLATION
MMA welding
Insert the cable plug with electrode holder into the “+” socket on the front panel of the welding machine
and ghten it clockwise.
Insert the cable plug of the work return lead into the “-” socket on the front panel of the welding machine
and ghten it clockwise. Example shown below:
TIG welding
Insert the cable plug with the work clamp into the “+” socket on the front panel of the welding machine
and ghten it clockwise.
Insert the cables plug of the TIG torch into the “-” socket on the front panel of the machine and ghten
clockwise. Connect the gas quick connector into the outlet on the machine front.
Connect the torch switch plug into the socket on the front panel.
Connect the gas hose to the regulator/owmeter located on the shield gas cylinder and connect the
other end to the machine. Example shown below:
Please Note:
Before starng any welding acvity ensure that you have suitable eye protecon, protecve clothing
and all required PPE. Also take the necessary steps to protect any persons within the area.