What to do if the Jasic TIG Welding System power LED is OFF and the fan is not functioning?
If the power LED is off and the fan isn't working on your Jasic Welding System, first ensure the main power supply is switched ON and check/replace the input fuse. Also, verify that the welding power source input switch is ON. Finally, check and secure any loose connections internally.
How to fix excessive spatter in MMA welding with Jasic TIG?
If you're experiencing excessive spatter during MMA welding with your Jasic Welding System, the output polarity connection may be incorrect. Try exchanging the polarity connection.
Why does the TIG electrode melt when arc is struck with my Jasic TIG?
If the TIG electrode melts when striking an arc with your Jasic Welding System, it's likely that the TIG torch is connected to the (+) VE terminal. Reconnect the TIG torch to the correct terminal.
General| Output Current Range | 10-200A |
|---|---|
| Welding Type | TIG |
| Frequency | 50/60 Hz |
| Protection Class | IP21S |
| Insulation Class | F |
| Duty Cycle | 60% |
Covers safety precautions related to electrical connections, grounding, and avoiding live parts.
Provides guidelines for safe operation, handling, and use in hazardous environments.
Details essential protective gear like helmets, glasses, clothing, gloves, and footwear for welding.
Guides on connecting the power supply and output terminals for MMA and TIG welding.
Step-by-step guide to connecting electrode holder and work return lead for MMA welding.
Instructions for connecting the TIG torch, work clamp, and gas hose for TIG welding.
Explains MMA welding, shielding from flux, and weld bead formation.
Steps to select MMA mode, check output, and use VRD indicator and current adjustment.
Details on setting welding current, hot start, and arc force for optimal MMA results.
Explains TIG welding, process types (DC/AC), and connection of torch, work clamp, and gas.
Guides on selecting DC TIG mode, 2T operation, and adjusting Pre-flow, Initial Current, and Upslope time.
Details on setting downslope time, final current, and post-flow gas time for TIG welding.
Lists common MMA welding defects, their possible causes, and recommended actions for prevention.
Explains DC welding principles, electrode negative setup, and heat distribution for penetration.
A step-by-step guide for basic DC TIG welding setup, including parameter settings.
Provides recommended settings for Pre-gas time, Start Current, Upslope time, Peak current, etc.
Identifies common TIG welding defects, their causes, and corrective actions.
Addresses specific TIG welding problems like bead build-up, penetration, and tungsten melting with solutions.
Outlines daily, monthly, and yearly maintenance tasks and provides a record for service history.
Lists common operational faults, their potential causes, and recommended user actions.
Explains various error codes, their categories, symptoms, causes, and user-implemented measures.
To Next Page
