Need help?Do you have a question about the JASMINER X16-Q and is the answer not in the manual?
Inspect the machine upon unpacking for any deformation or interface damage, and contact after-sales service if issues are found.
Adhere to operating environment guidelines, avoid connecting to POE devices, and prevent dust accumulation to ensure optimal performance.
Guidelines for machine placement, safety warnings against disassembly, and advice on avoiding contact with the hot case during operation.
Detailed technical and environmental specifications including processor, memory, algorithm, network connections, ports, power, and operating conditions.
Identification and description of the machine's interfaces, such as WiFi antenna, Ethernet port, TF card slot, and status indicator lights.
Instructions for correctly connecting network cables, power supply, and WiFi antenna for initial setup.
Steps to download, install, and use the group control software to scan for and configure the machine's IP and network settings.
Guide to selecting mining algorithms (ETC/ETH), setting working frequency, and submitting configuration parameters.
Instructions for accessing the backend console via web browser to configure mining pool settings and start the machine.
Procedure for connecting to the Jasminer Wi-Fi, accessing the backend console, and linking to a common network for management.
Instructions for changing login credentials, viewing logs, upgrading firmware, restarting, and restoring factory settings.
General| Algorithm | Ethash |
|---|---|
| Network Connection | Ethernet |
| Manufacturer | JASMINER |
| Model | X16-Q |
| Category | Server |
| Weight | 12.5kg |
| Humidity | 5-95% |
| Noise Level | 40 dB |
| Operating Temperature | 0-40 °C |
| Voltage | 100-240V |
To Next Page