12
• Always unplug the appliance from the mains when
lling the tank with water.
• Avoid any contact between the cable and the hot
parts of the iron.
• Do not leave the iron in a vertical position. Leave it
always in its supporting in an horizontal position.
• During the rst use it is possible that the products
used in the manufacturing process of the appliance
may contaminate the steam. We recommend that
you allow the steam to ow for a few minutes
before starting to iron.
• The iron may have some smoke and / or smells
during the rst few uses. This is completely normal
in this kind of appliances.
• This appliance has been designed for domestic use
only.
• The possible rests of water in the tank are due to
the quality controls done in our production lines.
• The cleaning and maintenance done by users, can
not be done by children without any supervision.
• If the cable were to deteriorate it must be changed
by an Authorised Service Centre.
INSTRUCTIONS OF USE
•For a correct functioning the appliance must be on a flat surface.
•Remove the tank (7) by keeping pressed the release button (9) and pulling out by the water tank.
•Remove the filter (8).
•With the help of a bottle or a jug or directly from the tap pour water into the tank (7). Do not go
over the water tank (MAX) indication. In the case of very hard waters you may use distilled water.
•Replace the filter and the water tank to its original position and press it inside wards till hearing a
“click” that means the release pusher (9) is fixed. Before doing this operation be sure the filter (8)
is correctly placed.
MANUAL CP820.indd 12 10/05/17 15:03
To Next Page
Loading...
