Jawbone UP2 Setup

6/29/2015 https://help.jawbone.com/articles/en_US/PKB_Article/setupup2
https://help.jawbone.com/articles/en_US/PKB_Article/setupup2 1/7
JAWBONESUPPORT>SETUP UP2
Setup UP2
Step 1: Charge your band*
1. Your band takes approximately one hour to fully
charge. Connect the charging cable to your band by aligning the pins on the
charger with the band. A magnet will hold the charger in place.
2. Insert the charging cable into the USB drive on
your computer or a standard USB wall adapter.
3. Icons on the face of the band will light up and
pulse while the band is charging.

Jawbone UP2 Specifications

General

Weight	25 g
Battery Life	Up to 7 days
Connectivity	Bluetooth 4.0
Water Resistance	Splash-proof
Compatibility	iOS and Android
Sensors	Accelerometer
Activity Tracking	Calories Burned