TOUBLESHOOTING GUIDE
HOW DO I CHARGE MY X3 BUDS?
Your Jaybird X3 buds come with a directional charging clip. To charge follow the steps below.
1. Connect the included USB charging cable to the charging clip on one end.
2. Connect the charging clip to the inline remote on your X3 buds with the Micro USB
connector facing away from the earpiece. You’ll notice the charging clip is tapered just
like the inline remote. The wider section of the charging clip aligns with the wider section
of the remote.
3. Connect the other end of the USB charging cable to a USB power source.
4. Limit the charge time to 2.5 hours. To get the most out of your battery it is recommended
to charge the buds when you hear the ‘Charge Me’ voice prompt (about 10% battery
remaining). If you’re pressed for time and only have time to partially charge your buds,
you’ll get around an hour of playtime for every 20 minutes of charge.
When turned on and not playing music, pressing Volume + or Volume – will announce
To Next Page
Need help?
General
Weight and Dimensions
