JAYCO TOWABLE SECTION 12 - INTERIOR
JFXTT/CT 12-5
HEATED BED MATS (IF SO EQUIPPED)
The heated bed mats are manufactured to reach gentle, soothing heat warmth,
NOT the pain relieving heat of a heating pad. At first touch it may seem only
slightly warm because it is conserving energy. As your body weight presses onto
the bedding, and a blanket covers you, it will feel considerably warmer and
comfortable.
Ensure the heated bed mats are on the bed board with the label and
connector pointed up.
The cord should be at the head of the bed.
Do not tuck in the wired area of the heated bed mats.
Let the cord hang free. Do not route electrical cords between the heated bed
mats and the bed boards. Do not allow the cords to be pinched. NEVER pull a
heated bed mat by its cord.
Keep the heated bed mat control away from an open window.
Do not use pins or any heavy, sharp pointed objects on the heated bed mats.
They may damage the heating elements.
Be sure the heated bed mats are used on a 120 volt AC circuit.
Turn off the electric current when this bedding is not in actual use.
Maintenance
Unplug the bed mats first. Wipe gently or blot the soiled area, using a damp cloth
treated with a mild detergent. DO NOT IMMERSE the heated bed mats; allow
them to dry thoroughly before plugging them in for use.
WARNING
Be sure to read all instructions carefully before using the heated bed mats.
YOUR BEDDING SHOULD ALWAYS REMAIN FLAT, NEVER FOLDED,
ROLLED OR BUNCHED. EXCESSIVE HEATING MAY OCCUR FROM
MISUSE.
WARNING
Do not use dry cleaning fluid on the heated bed mats. Cleaning solvents may
have a deterioratin
To Next Page
Loading...
Need help?
General
