CLASS C MOTORHOME SECTION 4 – VEHICLE OPERATION
MMHC/GHMHC 4-11
The monitor is operational whenever the engine is running. To use the monitor, flip
the switch from standby to ON (the monitor will also work when with the motor
home is in “reverse” and the monitor in standby). Make sure you turn the
monitor to standby while driving to avoid being distracted.
Never operate the rear vision monitor in the ON position for extended periods of
time as this may result in an "image burn" on the monitor.
WARNING
The rear vision camera aids in the use of, but does not replace vehicle
WARNING
Objects in the camera view are closer than they appear. When backing up,
proceed cautiously and be prepared to stop.
To Next Page
Loading...
