SECTION 7 - FUEL & PROPANE SYSTEM CLASS C MOTORHOME
7-6
1: Propane fill valve; 2: Propane gauge
Fig. 7.4 ASME tank
Servicing or filling
Because the container is not removable, the motor home will need to be driven to
a qualified propane facility for servicing or filling. Only the authorized gas service
technician(s) should be near the motor home while the propane tank is being filled.
The new propane container must be carefully purged for proper appliance
performance and operation. The propane tank must NEVER BE OVERFILLED.
Replace all protective covers and caps on the propane system and/or container
after filling. Make sure the valve is closed and the compartment door is securely
latched.
LP gas container overfill
Never allow your propane tank to be filled above the maximum safe level as
indicated by the fixed liquid level gauge.
Do not allow the visible gauge to be used for filling. Overfilling the propane
container above the liquid capacity indicated on the container, could allow liquid
propane to enter the system that is designed for vapor only creating a hazardous
condition.
WARNING
Always shut OFF the engine while refueling. Do not smoke and do not
operate other ignition sources while refueling.
WARNING
When the propane container is disconnected from the main supply hose and
the P.O.L. connection, install the P.O.L. plastic cap that is attached to the
To Next Page
Loading...
Need help?
General
