Need help?Do you have a question about the JBL 305P MkII and is the answer not in the manual?
General| Type | Powered Studio Monitor |
|---|---|
| Crossover Frequency | 1725 Hz |
| Maximum Peak SPL | 108 dB |
| Enclosure Type | Ported |
| Power Output | 82W |
| Transducers | 5" woofer, 1" tweeter |
| Inputs | 1 x XLR, 1 x 1/4" TRS |
| Weight | 10.43 lbs |
| LF Driver Power Amp | 41W |
| HF Driver Power Amp | 41W |
| Dimensions | 298 mm x 185 mm x 231 mm (11.7 in x 7.3 in x 9.1 in) |
Explains JBL's design criteria for accurate sound at the listening position in various rooms.
Describes the waveguide technology for enhanced imaging, wide soundstage, and a broad sweet spot.
Lists key features of the 3 Series MkII monitors, including transducers, ports, bi-amplification, and controls.
Details the features of the LSR310S subwoofer, including its driver, amplifier, port, and controls.
Discusses JBL's 100-hour power test ensuring long-term reliability and performance.
Provides step-by-step instructions for safely unpacking the 3 Series MkII studio monitors and the LSR310S subwoofer.
Offers recommendations for optimal speaker placement to achieve exceptional imaging and sound quality.
Explains how to connect audio sources to the 3 Series speakers and subwoofer.
Details how to connect the power cables to the speakers and subwoofer for operation.
Guides users through the initial steps of powering on and setting up the audio system to produce sound.
Lists and describes the key features of the 305P, 306P, and 308P MkII studio monitors.
Details the connectors and controls found on the input panel of the studio monitors.
Lists and describes the key features of the LSR310S powered studio subwoofer.
Details the connectors and controls on the input panel of the LSR310S subwoofer.
Explains how to connect audio sources to the LSR310S subwoofer, including LFE channel connection.
Guides on setting the subwoofer's volume level and polarity for optimal system balance.
Explains crossover settings and bass management techniques for system integration.
Discusses using the subwoofer in surround sound systems and for LFE channel reproduction.
Illustrates system connections for a basic two-channel stereo setup.
Illustrates system connections for a surround sound setup, including multiple speakers.
Provides troubleshooting steps for situations where no sound is produced by the speakers.
Offers solutions for audio distortion issues, checking sensitivity and gain stages.
Suggests steps to increase signal level, checking volume and sensitivity settings.
Provides tips for reducing boominess, involving placement and EQ adjustments.
To Next Page
