Need help?Do you have a question about the JBL 4311 and is the answer not in the manual?
General| Impedance | 8 ohms |
|---|---|
| Sensitivity | 91dB SPL (1W/1m) |
| Type | 3-way studio monitor |
| Crossover Frequency | 1.5 kHz, 6 kHz |
| Woofer | 12-inch |
| Midrange | 5-inch |
| Dimensions | 23.5 x 14.25 x 13 inches |
| Tweeter | 1.4-inch |
Compact enclosure providing wide-range response and 90° dispersion.
Lists the 300mm LF, 130mm MF, 36mm HF drivers and crossover network.
300mm (12-in) driver with long excursion and 76mm (3-in) copper ribbon voice coil.
130mm (5-in) driver with Alnico V magnet, producing clear sound.
36mm (1.4-in) radiator for high frequencies, ensuring uniform dispersion.
Network with front panel controls to regulate midrange and high frequency output.
Solidly constructed unit with ducted port for acoustical loading.
Front panel controls for tailoring frequency response to acoustic environment.
On-axis response within ±3 dB from 45 Hz to 15 kHz, low distortion.
Detailed technical specifications including power capacity, impedance, and sensitivity.
To Next Page
