. Troubleshooting
A. If the unit does not power up, consider the following tips.
1. Incorrect wiring
Solution: Double check wiring making sure connections are firm.
2. Fuse is blown
Solution: Replace fuse
3. Voltage source is not sufficient
Solution: Voltage must be between 11-13.6 Volts.
B. If no sound exists, consider:
1. Speaker connection came loose
Solution: Double check connection
2. Bad speaker
Solution: Replace bad speaker with known good speaker and connect.
3. Output blown
Solution: Send unit in for repair
C. No Reception
1. Antenna not firmly seated in socket
Solution: Insert antenna firmly
2. Antenna tail/tails is/are balled and not spread out.
Solution: If using a softwire antenna, extend the tail/tails as much as possible.
D. USB stick not reading
1. File must be a mp3 or wma file
Solution: Convert format to mp3 or wma
To Previous Page
Loading...
