System Spec
System Type: Self powered 18", bass-reflex
Maximum SPL Output: 133 dB peak
Frequency Range (-10 dB): 30 Hz - 105 Hz
Frequency Response (±3 dB): 39 Hz - 93 Hz
Input Connectors: Balanced XLR 1/4 inch combo jack with XLR loop through.
(stereo)
Input Impedance: 20K Ohms (balanced), 10K Ohms (unbalanced)
Signal indicators: Limit : Red LED indicates limiter active condition
Signal: Green LED indicates signal present
Polarity: normal or reverse polarity
Crossover Modes: DSP controlled 48 dB/Oct. filter slope
Crossover Frequency: 90 Hz
Dynamic Control (Input): dbx Type IV™ limiter circuit
Amplifier
Design: Crown® Class D
Power Rating: 1000 W (2 x 500)
Speaker
LF Driver: 460 mm (18 in) Differential Drive® dual voice-coil and magnetic
gap, neodymium woofer
Enclosure: Rectangular, 18 mm, plywood
Suspension / Mounting: M20 threaded pole socket on top
Transport: 2 x injection molded handles with backing cup
Finish: Obsidian DuraFlex™ finish
Grille: Powder coated, Obsidian, 16 gauge perforated steel with
acoustically transparent black cloth backing.
Dimensions (H x W x D): 685.8 mm x 530.9 mm x 716.3 mm (27.0 in x 20.9 in x 28.2 in)
Net Weight: 37 kg (81.5 lb)
Gross Weight: 42.3 kg (93 lb)
PRX618S-XLF
18