JBL STAGE 2 Series - Page 9

JBL Stage 2 QSG | Rev 1.0 20240402
©2024 HARMAN International | Features, Specications, and Appearance subject to change without notice. Pg 6 of 10
EN
Connections
CAUTION: Make sure that all the system's electrical components are turned OFF (and preferably unplugged from their AC outlets) before
making any connections.
Speakers and ampliers have corresponding positive and negative ("+" and"-") connection terminals. All Stage series speakers have
connection terminals that are marked "+" and "-" on the terminal-cup assembly. Additionally, the "+" terminals have red markings, while
the "-" terminals have black markings.
To ensure proper polarity, connect each "+" terminal on the back of the amplier or receiver to the respective "+" (red) terminal on each
speaker. Connect the "-" terminals in a similar way. Do not reverse polarities (i.e.,"+" to"-" or "-"to"+") when making connections. Doing so
will cause poor stereo imaging and diminished bass performance.
Connections, Bare Wire Connectors:
USING SPADE CONNECTORS:
USING BANANA CONNECTORS: