EasyManua.ls Logo

JBL XTREME 2 - Important Warnings and Specifications

JBL XTREME 2
14 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
JBL Xtreme 2 is IPX7 waterproof.
IMPORTANT: To ensure that the JBL Xtreme 2 is waterproof, please remove all cable connections and
tightly close the cap; exposing the JBL Xtreme 2 to liquids without doing so may result in permanent
damage to the speaker, And do not expose JBL Xtreme 2 to water while charging, as doing so may
result in permanent damage to the speaker or power source. IPX7 waterproof is defined as the speaker
can be immersed in water up to lm for up to 30 minutes.
If the speaker will not be used for a long period of time, please recharge the battery at least once
every 3 months. Battery life will vary due to usage patterns and environmental conditions.
EN
Bluetooth version: 4.2
Support: A2DP V1.3, AVRCP V1.6, HFP V1.6, HSP V1.2
Transducer: Woofer 2 x 2.75 inch
Tweeter: 2 x 20 mm
Rated power: 2 x 20W RMS Bi-amp (AC mode)
Frequency response: 55Hz-20kHz
Signal-to-noise ratio: >80dB
Power supply: 19V 3A
Battery type: Lithium-ion Polymer 36Wh (Equivalent to 3.7V10000mAh)

Other manuals for JBL XTREME 2

Related product manuals