· 7 ·
REF.54327
STEP 8: Put the shelf holders inside de cabinets.
Install the shelves and the doors.
STEP 9: If the oor is uneven, change the height of the ad-
justable legs using the hexagonal wrench.
STEP 10: If you want to attach the unit to the wall, you will
need to use the extension bars.
Place the unit against the wall.
Insert the extension bars into the posts at your desired hei-
ght.
Make a mark in the wall in the place where you will drill the
holes.
Take out the extension bars and take drill the wall.
Put again the extension bars and attach them to the wall
with the M4x30 screws.
To Next Page
Loading...