About the Product
Product and Component Identification
12 9811/9500-4 12
If the machine is used in any application where there is a risk of falling objects then a FOPS must be installed.
For further information, contact your JCB dealer.
The FOPS has a data plate attached. The data plate indicates what level of protection the structure provides.
There are two levels of FOPS Level I is standard:
• Level I Impact Protection - impact strength for protection from small falling objects (e.g. bricks, small
concrete blocks, hand tools) encountered in operations such as highway maintenance, landscaping and
other construction site services.
• Level II Impact Protection - impact strength for protection from heavy falling objects (e.g. trees, rocks) for
machines involved in site clearing, overhead demolition or forestry.
Figure 8.
Figure 9.
To Next Page
Loading...
