jcb 535-140 Hi Viz - Pre-Start Cold Checks, Service Points and Fluid Levels

Section 3-2 - Routine Maintenance
Service Schedules - Machines with SD and SF Engines
Pre-start Cold Checks, Service Points and Fluid Levels
3-2-3 3-2-3
9803/3750-05 (3-20-00)
Pre-start Cold Checks, Service Points and Fluid Levels
Operation 10 50
100
(1)
500 1000 2000 6000
ENGINE
Coolant Quality and Level - Check

Cooling System - Drain and Refill

Oil level - Check

Oil and Filter
(2)(3)(4)
- Change

Air Cleaner Dust Valve
(5)
- Clean

Air Cleaner Outer Element
(5)
- Change

Air Cleaner Inner Element - Change

Pre-Cleaner (if fitted) - Check

Water Separator and Engine Fuel Filter - Drain

Water Separator Fuel Filter
(6)
- Change

Engine Fuel Filter
(6)
- Change

Front End Accessory Drive (FEAD) Belt
Condition
- Check

Front End Accessory Drive (FEAD) Belt - Change

Engine Mounting Bolts for Tightness - Check

All Hoses - Condition - Check

Radiator
(5)
- Clean

Breather Gauze (if fitted) - Clean

Valve Clearances
(7)
- Check and Adjust

Oil Filler and Dipstick Seals - Change

Rocker Cover and Injector Seals
(7)
- Change

Injectors
(7)
- Change

Injector(s) Leak Off Rail
(7)
- Change

High Pressure Fuel Lines
(7)
- Change

TRANSMISSION, AXLES AND STEERING
Transmission Mount Security - Check

Transmission Oil Level - Check

Transmission Oil
(8)
- Change

Transmission Oil Filter - Change

ProCarManuals.com