Section 1-5 - General Information
1-5-1 1-5-1
9803/3750-05 (1-06-00)
Service Tools
Introduction
The tools listed in the table are special tools required for carrying out the procedures described in this manual. These tools
are available from JCB Service or, in some instances, can be manufactured locally from the specifications given in this
section.
Note: Tools other than those listed will be required. It is expected that such general tools will be available in any well
equipped workshop or be available locally from any good tool supplier.
K
Numerical List ( T 1-5-2)
K Tool Detail Reference ( T 1-5-5)
K Rivet Nuts ( T 1-5-23)
K Slide Hammer Kit ( T 1-5-25)
ProCarManuals.com
To Next Page
Loading...
