SO53 3LE
Customer Helpline 0845 600 5526 Monday to Friday 09.00 to 17.00
www.JCBdiy.com
can be violent enough to cause the operator to lose control of the unit.
Blade thrust can occur without warning if the blade snags, stalls or
binds. This is more likely to occur in areas where it is difficult to see the
material being cut. For safety and ease of cutting, approach the weeds
being cut from the right to the left. In the event an
unexpected object or woody stock is encountered,
this could minimize the blade thrust reaction.
Never cut any material over 13 mm in diameter.
Always wear the shoulder strap when using the brushcutter and adjust to a
comfortable operating position. Maintain a firm grip on both handles while cutting
with a blade. Keep the blade away from the body and below waist level. Never use
the brushcutter with the blade located 76 cm or more above ground level.
Cover the blade with the blade protector before storing the unit or during
transportation. Always remove the blade protector before using the unit.
If not removed, the blade protector could become a thrown object as the blade
begins to turn.
JCB-BC26_960443002-01_Manual_final.indd A5JCB-BC26_960443002-01_Manual_final.indd A5 12/2/2010 5:37:59 PM12/2/2010 5:37:59 PM
To Next Page
Loading...
Need help?
General
