EasyManua.ls Logo

JDW ZQ562 - Charger Safety

Default Icon
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
08
Chargers
- Longest life and best performance can be obtained if the battery
pack is charged when the air temperature is between 18-24C.
Do not charge the battery pack in a very low or very high air
temperature.
- The Charger’s plug must match the outlet. Never modify the plug
in any way. Unmodied plugs and matching outlets will reduce risk
of electric shock.
- Use your charger only to charge batteries of the type supplied
with your tool. Other batteries could burst, causing personal injury
and damage.
- Only 2 battery packs are allowed to be charged continuously in
order to prevent overheating of charger, necessary rest time is
required to let the charger cool down before further charging.
- When charging is nished, unplug the charger from mains socket
outlet and take away the battery pack from the charger, do not
leave the battery pack in the charger.
- Never carry the charger by its cord or pull the cord to disconnect
from the socket. Keep the cord away from heat, oil and sharp
edges.
- Never attempt to charge non-rechargeable batteries.
- The cord of charger is not changeable, do not continue to use if
the cord is damaged.
- Do not expose to water or rain, do not use in wet conditions.
- Do not open the charger.
- Do not probe the charger.
- The charger is intended for indoor use only.
- The charger and battery pack may become warm to touch while
charging. This is a normal condition, and does not indicate a
problem.

Related product manuals