•
Get everyone out of the vehicle before you jack it up.
If the jack should fall, someone in the vehicle could be
hurt.
•
Block tire diagonally oppo-
site tire to be changed to pre-
vent forward and backward
vehicle movement.
Instructions
1. Remove spare tire, jack and tools from stored location.
2. Before raising vehicle, loosen lug nuts on wheel with
flat tire.
3. Assemble the jack and jacking tools as shown. Connect
jack handle driver (1) to extension (2) then to lug wrench
(3).
4. Operate jack from the front or the rear of the vehicle.
Place the jack under the axle tube, as shown.
214 WHAT TO DO IN EMERGENCIES
To Next Page
Loading...
