4. When the belt is long enough to fit, insert the mini
latch plate into the mini buckle until you hear a “click.”
5. Sit back in seat. Slide the regular latch plate up the
webbing as far as necessary to allow the belt to go around
your lap.
6. When the belt is long enough to fit, insert the latch
plate into the buckle until you hear a “click.”
7. Position the lap belt across your thighs, below your
abdomen. To remove slack in the lap belt portion, pull up
Routing The Rear Center Shoulder Belt
Connecting Mini Latch to Buckle
44 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE
To Next Page
Loading...
