symbol appears. The current variance value will also be
displayed. To change the zone, press the left button once
to increment the zone. The default is Zone 8. After Zone
15, the values will wrap around to Zone 1. When the
correct zone is displayed (per the Zone map) for the zone
that the vehicle is located in, wait for about 5 seconds,
then the trip computer will store the variance value in
memory and the compass will resume normal operation.
NOTE: The US/Metric display will change from En-
glish to Metric or Metric to English before the VAR
symbol appears, however, it will revert back to its
original setting after programming the compass func-
tions.
UNDERSTANDING YOUR INSTRUMENT PANEL 215
4
To Next Page
Loading...
