5. Unlatch the header panel latch located at the top of the
windshield.
6. Remove panel.
To remove right panel, follow steps above except for
Step 2.
Front Panel(s) Installation
NOTE: The front panel(s) must be positioned properly
to ensure sealing. Set the panels on the windshield frame
so that there is no overhang. Also, make sure that the
panels are sitting flush with the body.
1. Install right panel first, then the left panel.
2. Reinstall panel(s) using the same steps for removal in
reverse order.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 117
3
To Next Page
Loading...
