EasyManua.ls Logo

Jeep 2014 Wrangler - Tire Pressures

Jeep 2014 Wrangler
140 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Cavity Cartridge Fuse Mini Fuse Description
M34 10 Amp Red
Park Assist, Climate Control System,
Headlamp Wash, Compass
M35 10 Amp Red Heated Mirrors
M36 20 Amp Yellow Power Outlet
M37 10 Amp Red Anti-Lock Brake System, Electronic
Stability Control, Stop Lamp
Switch, Fuel Pump Relay
M38 25 Amp Natural Lock/Unlock Motors
CAUTION!
When installing the Integrated Power Module cover, it is important to ensure the
cover is properly positioned and fully latched. Failure to do so may allow water to
get into the Integrated Power Module, and possibly result in an electrical system
failure.
When replacing a blown fuse, it is important to use only a fuse having the correct
amperage rating. The use of a fuse with a rating other than indicated may result
in a dangerous electrical system overload. If a properly rated fuse continues to
blow, it indicates a problem in the circuit that must be corrected.
TIRE PRESSURES
Check the inflation pressure of each tire, including the spare tire, at least monthly
and inflate to the recommended pressure for your vehicle.
The tire pressures recommended for your vehicle are found on the “Tire and
Loading Information” label located on the driver’s side door opening.
Two Door Tire Placard Location
MAINTAINING YOUR VEHICLE
124

Table of Contents

Other manuals for Jeep 2014 Wrangler

Related product manuals