Raising The Windshield And Replacing Side Bars
1. Raise the windshield.
2. Loosely attach the rear of the side bar to the sport bar.
Refer to Step 4 of “Lowering Windshield And Remov-
ing Side Bars” earlier in this section.
• Reattach the sport bar Velcro® covering.
3. Attach the front of the side bar to the windshield
frame.
• Install the top two hex bolts (13 mm) first, then the
lower side hex bolt (13 mm). The lower side bolt will
not align until the top two bolts are installed.
4. Tighten all side bar attachment bolts.
296 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
To Next Page
Loading...
