depending on the location, type and orienta-
tion of the obstacle. When an obstacle is
detected, a warning will display in the instru-
ment cluster and a chime will sound (when
Sound and Display is selected from the Cus-
tomer Programmable Features section of the
Uconnect System screen). As the vehicle
moves closer to the object, the chime rate
will change from single 1/2 second tone, to
slow, to fast, to continuous.
• If the system detects a potential impact with
an object, the vehicle brakes may be
applied.
For further information, and applicable warnings
and cautions, please refer to the Owner’s Manual at
www.mopar.com/en-us/care/owners-manual.html
(U.S. Residents) or www.owners.mopar.ca (Ca-
nadian Residents).
Transmission Gear Selector and
AutoStick
Your vehicle is equipped with a fuel efficient
8-speed transmission. The gear selector lo-
cated in the center console also features a
manual mode called AutoStick.
To activate AutoStick mode, move the gear
selector into the MANUAL (M) or SPORT (S)
position (beside the DRIVE position), or tap one
of the shift paddles on the steering wheel (if
equipped). Tapping the (-) shift paddle (if
equipped) to enter AutoStick mode will down-
shift the transmission to the next lower gear,
while tapping (+) to enter AutoStick mode will
retain the current gear. The current transmis-
sion gear will be displayed in the instrument
cluster. In AutoStick mode, you can use the
gear selector (in the MANUAL or SPORT posi-
tion), or the shift paddles (if equipped), to
manually shift the transmission. Tapping the
gear selector forward (-) while in the MANUAL
(M) or SPORT (S) position, or tapping the (-)
shift paddle (if equipped), will downshift the
transmission to the next lower gear. Tapping the
selector rearward (+) (or tapping the (+) shift
paddle, if equipped) will command an upshift.
Transmission Gear Selector
1 — Lock Button
2 — Transmission Gear Selector
STARTING AND OPERATING
To Next Page
Loading...
