398 MULTIMEDIA
NOTE:
For devices which are not made a favorite, the
device priority is determined by the order in
which it was paired. The latest device paired will
have the higher priority.
You can also use a following VR command to
bring up a list of paired audio devices:
“Show Paired Phones”
Connecting To A Particular Mobile Phone Or
Audio Device After Pairing
Uconnect Phone will automatically connect to
the highest priority paired phone and/or Audio
Device within range. If you need to choose a
particular phone or audio device follow these
steps:
1. Press the
Uconnect Phone Pairing or
Settings
button on the touchscreen.
2. Press the Paired Phones and Audio Devices
button and then press Paired Phones/Audio
Sources buttons or press the Paired
Phones/Audio Sources buttons.
3. Press to select the particular phone or the
particular audio device. A pop-up menu will
appear; press “Connect Phone”.
4. Press the X to exit out of the Settings
screen.
Disconnecting or Deleting A Phone Or Audio
Device
Uconnect 3 With 5-inch Display
Uconnect 4 With 7-inch Display
1 — Disconnect Device or Disconnect Phone
2 — Make Favorite
3 — Delete Device/Phone
1 — Disconnect Device or Disconnect Phone
2 — Make Favorite
3 — Delete Device/Phone
20_BV_OM_EN_USC_t.book Page 398
To Next Page
Loading...
