GETTING TO KNOW YOUR VEHICLE 53
Automatic Climate Control Descriptions
Icon Description
MAX A/C Button
MAX A/C sets the system for maximum cooling performance. Push the button to turn on the MAX A/C setting. In MAX A/C,
the blower speed and mode position can be adjusted to desired user settings.
NOTE:
The MAX A/C button is only on the touchscreen.
A/C Button
Push the A/C control button to change the current setting. The indicator illuminates when the A/C is ON. Pushing the AUTO
control button will cause the A/C operation to change to AUTO mode and the A/C indicator will turn off.
Recirculation Button
Press and release this button on the touchscreen or push the button on the faceplate, to change the system between recir-
culation mode and outside air mode. Recirculation can be used when outside conditions, such as smoke, odors, dust, or
high humidity are present. Recirculation can be used in all modes. Recirculation may be unavailable (button on the touch-
screen greyed out) if conditions exist that could create fogging on the inside of the windshield. Continuous use of the Recir-
culation mode may make the inside air stuffy and window fogging may occur. Extended use of this mode is not
recommended.
AUTO Button
Pushing this button will automatically control the interior cabin temperature by adjusting the airflow temperature, distribu-
tion and amount. Performing this function will cause the automatic climate controls to change between manual mode and
automatic mode. Refer to “Automatic Operation” within this section for more information.
2
20_BV_OM_EN_USC_t.book Page 53
To Next Page
Loading...
