Jeep 2022 WRANGLER RUBICON 392 - Fluid Capacities; Engine Fluids and Lubricants

SERVICING AND MAINTENANCE 27
Engine Air Cleaner Filter Removal
1. Loosen the fasteners from the air cleaner
cover using a suitable tool.
Engine Air Cleaner Cover
2. Lift the engine air cleaner filter cover to access
the engine air cleaner filter by rotating at the
hinge and pulling the cover away from the
engine.
3. Remove the engine air cleaner filter from the
housing assembly.
Engine Air Cleaner Filter Installation
NOTE:
Inspect and clean the housing if significant dirt or
debris is present before replacing the engine air
cleaner filter.
1. Install the engine air cleaner filter into the
housing assembly with the engine air cleaner
filter inspection surface facing downward.
2. Tighten engine air cleaner filter cover
fasteners using a suitable tool.
1 — Engine Air Cleaner Filter Cover
2 — Fasteners
CAUTION!
Do not overtighten the engine air cleaner filter
cover lid screws or damage may result.
4
22_JL_RUB_SU_EN_USC_t.book Page 27