Jeep New Cherokee
Vehicle towing/lifting
5.1.6 Anchorage of the flat bed for towing
WARNING:
Do not apply chains or ropes on the suspension components or in
the engine coupling points, otherwise the vehicle could be severely
damaged.
Vehicles can be secured to a trailer using the reinforced rings under
the front and rear bumper, on the driver side of the vehicle. There
are also four elongated holes, reinforced type, for T or R hooks,
located at the bottom of the reaction elements of the front frame rail,
inside the inner part of the welding junction of the kickplate.
5.1.7 Towing by lifting front wheels
Whenever possible, it is recommended to tow the vehicle with its
front part lifted from the ground. A wooden bar can be placed
between the lift and the lower part of the moulding, to prevent any
damage to the vehicle during lifting operations. The bar can be
removed after having lifted the vehicle's front part.
5.1.8 Towing by lifting rear wheels
Towing of the vehicle with lifted rear wheels is forbidden.
To Next Page
Loading...
