End Of Maneuver
The semi-automatic maneuver ends when the
display shows the message of a completed
maneuver. At the end of the maneuver, the
system gives back the vehicle control to the
driver.
Important Information
• If the sensors undergo impact which alters
their position, the system operation could be
greatly affected.
• The sensors reach top performance after the
vehicle has gone about 30 miles (50 km).
• Clean the ParkSense sensors regularly, tak-
ing care not to scratch or damage them. The
sensors must not be covered with ice, snow,
slush, mud, dirt or debris. Failure to do so can
result in the system not working properly. The
ParkSense system might not detect an ob-
stacle behind or in front of the fascia/bumper,
or it could provide a false indication that an
obstacle is behind or in front of the
fascia/bumper.
• Construction equipment, large trucks, and
other vibrations could affect the performance
of ParkSense.
• Sensors may detect a nonexistent obstacle
(echo noise) due to mechanical noises, for
example while washing the vehicle or in the
case of rain, strong wind, and hail.
• The sensors may not detect objects of a
particular shape or made from particular ma-
terials (very thin poles, trailer beams, panels,
nets, bushes, anti-parking posts, pavements,
rubbish bins, motor vehicles, etc.). Always
take great care to check that the vehicle and
its path are actually compatible with the park-
ing place identified by the system.
• The use of wheels and tires that are different
size to the original equipment could affect the
operation of the system.
• The operation of the rear sensors is automati-
cally deactivated when the trailer’s electric
plug is inserted in the vehicle’s tow hook
socket, while the front sensors stay active
and can provide acoustic and visual warn-
ings. The rear sensors are automatically re-
activated when the trailer’s cable plug is
removed.
• In "Search in progress" mode, the system
could incorrectly identify a parking place to
carry out the maneuver (e.g. by a junction,
driveways, roads crossing the direction of
travel, etc.).
• In the case of parking maneuvers on roads on
a slope, the performance of the system could
be inferior and it may deactivate.
Check Surroundings — Wait For Steering To
Complete
Check Surroundings — Move Backward
Active ParkSense Complete Check
Surroundings
195
To Next Page
