When making a selection, press the button on
the touchscreen to enter the desired mode.
Once in the desired mode, press and release
the preferred setting and make your selection.
Once the setting is complete, either press the
back arrow/Done button on the touchscreen or
the Back button on the faceplate to return to the
previous menu. Pressing the Up or Down Arrow
buttons on the right side of the screen will allow
you to toggle up or down through the available
settings.
NOTE:
All settings should be changed with the ignition
in the “ON/RUN” position.
The following tables list the settings that may be
found within the Uconnect 3 radio, along with
the selectable options pertaining to each setting.
Display
After pressing the “Display” button on the touch-
screen, the following settings will be available:
Setting Name Selectable Options
Display Mode Auto Manual
Brightness +-
NOTE:
The “Brightness” setting can also be adjusted by selecting any point on the scale between the “+” and “-” buttons on the touchscreen.
Language English Français Español
NOTE:
Selecting any option within the “Language” setting will change the language for all displayed nomenclature, including the trip functions and the navi-
gation system (if equipped).
Touchscreen Beep Yes No
Voice Settings Voice Response Length Show Command List
284
To Next Page
Loading...
