Safety/Assistance
After pressing the “Safety/Assistance” button on
the touchscreen, the following settings will be
available:
Setting Name Selectable Options
ParkView Backup Camera Delay —
If Equipped
On Off
NOTE:
The “ParkView Backup Camera Delay” setting determines whether or not the screen will display the rear view image with dynamic grid lines for up to
ten seconds after the vehicle is shifted out of REVERSE. This delay will be canceled if the vehicle’s speed exceeds 8 mph (13 km/h), the transmis-
sion is shifted into PARK, or the ignition is switched to the OFF position.
ParkView Backup Camera Active
Guide Lines — If Equipped
On Off
NOTE:
The “ParkView Backup Camera Active Guide Lines” setting overlays the Rear Backup Camera image with active, or dynamic, grid lines to help illus-
trate the width of the vehicle and its project back up path, based on the steering wheel position when the option is checked. A dashed center line
overlay indicates the center of the vehicle to assist with parking or aligning to a hitch/receiver.
Forward Collision Warning Plus
(FCW+) Sensitivity — If Equipped
Far Med Near
NOTE:
The “Forward Collision Warning Plus (FCW+) Sensitivity” setting determines at what relative distance the vehicle directly in front of you needs to be
at, before the system will warn you of a possible collision with the vehicle directly in front of you, based on the option is selected. “Far” will give you
the most amount of reaction time, whereas “Near” will give you the least amount of reaction time, based on the distance between the two vehicles.
286
To Next Page
Loading...
