JACK USAGE PRECAUTIONS
WARNING!
When using the lug wrench, make sure it turns
freely without the risk of scraping hands against the
ground.
Even the moving parts of the jack, the crank screw
and lug wrench adapter can cause injuries: avoid
contact with them. Clean it thoroughly if dirtied with
grease.
CAUTION!
The jack is a tool designed exclusively for changing
a wheel, in case of a puncture or damage to a tire
of the vehicle on which it is fitted or on vehicles
of the same model. Any other use, e.g. to jack up
other vehicle models or different things, is strictly
prohibited. Never use it to carry out maintenance
or repairs under the vehicle or to change summer/
winter wheels and vice versa. Never go under the
raised vehicle. If any work under the vehicle is
necessary, contact an authorized dealer. Incorrect
placing of the jack can cause the vehicle to drop:
use it only in the positions indicated. Do not use
(Continued)
CAUTION!
the jack for loads higher than that specified on the
label. Never start the engine with vehicle raised. If the
vehicle is raised more than necessary, everything can
become more unstable, with the risk of the vehicle
dropping violently. Therefore raise the vehicle only as
much as necessary for the wheel/spare.
Example Jack
1 — Crank Screw
2 — Lug Wrench Adapter
3 — Lug Wrench
Maintenance
● Make sure grime does not build up on the crank
screw.
● Keep the crank screw lubricated.
● Never modify the jack.
Conditions Of Non-Use:
● Temperatures below −40°C.
● On sandy or muddy ground.
● On uneven ground.
● On steep roads.
● In extreme weather conditions: thunderstorms,
typhoons, hurricanes, blizzards, storms, etc.
NOTE:
● The jack requires no adjustment.
● The jack cannot be repaired, and in the event of a
fault, it must be replaced by another genuine one.
● No tool other than its cranking device may be fitted
on the jack.
238 IN CASE OF EMER
GENCY
To Next Page
Loading...
