EasyManua.ls Logo

Jeep Compass - Starting and Operating; Starting the Engine; Normal Starting - Gasoline Engine

Jeep Compass
417 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
132
(Continued)
STARTING AND OPERATING
STARTING THE ENGINE
Before starting your vehicle, adjust your seat,
adjust both inside and outside mirrors, and
fasten your seat belts.
Start the engine with the gear selector in the
NEUTRAL or PARK position. Apply the brake
before shifting to any driving range.
NOTE:
For manual transmission versions that include
both Gasoline and Diesel models, ensure the
parking brake is engaged, and the clutch &
brake are pressed before starting the engine.
NORMAL STARTING GASOLINE
E
NGINE
Place the ignition switch to the START position
and release when the engine starts. If the
engine fails to start within 10 seconds, place
the ignition switch in the LOCK/OFF position,
wait 10 to 15 seconds, then repeat the “Normal
Starting” procedure.
WARNING!
When exiting the vehicle, always remove
the key fob from the vehicle and lock your
vehicle.
Never leave children alone in a vehicle, or
with access to an unlocked vehicle.
Allowing children to be in a vehicle unat-
tended is dangerous for a number of
reasons. A child or others could be seriously
or fatally injured. Children should be warned
not to touch the parking brake, brake pedal
or the transmission gear selector.
Do not leave the key fob in or near the
vehicle, or in a location accessible to chil-
dren, and do not leave the ignition of a
vehicle equipped with Keyless Enter-N-Go
in the ACC or ON/RUN mode. A child could
operate power windows, other controls, or
move the vehicle.
Do not leave children or animals inside
parked vehicles in hot weather. Interior
heat build-up may cause serious injury or
death.
WARNING! (Continued)
21_M6_OM_EN_IN_t.book Page 132

Table of Contents

Other manuals for Jeep Compass

Related product manuals