EasyManua.ls Logo

Jeep Compass - Integrated;Manual Ignition

Jeep Compass
417 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
GETTING TO KNOW YOUR VEHICLE 27
NOTE:
For information on normal starting, see
Ú page 132.
When opening the driver's door and the igni-
tion is in the ON/RUN (engine not running)
position, a chime will sound to remind you to
place the ignition in the OFF position. In addi-
tion to the chime, the “Vehicle On” message
will display in the cluster.
INTEGRATED /MANUAL IGNITION IF
E
QUIPPED
This vehicle may be equipped with an integrated/
manual ignition switch. It has three operating
positions, two with detents and one that is
spring-loaded. The detent positions are OFF and
ON/RUN. The START position is a spring-loaded
momentary contact position. When released
from the START position, the switch automatically
returns to the RUN position.
Integrated Ignition Switch
OFF
The engine is stopped.
The key can be removed from the ignition
switch.
Do not leave children or animals inside
parked vehicles in hot weather. Interior
heat build-up may cause serious injury or
death.
Never remove the mechanical key while the
vehicle is moving, as the steering wheel will
automatically lock as soon as the key is
turned. This also applies to vehicles that
are being towed.
CAUTION!
An unlocked vehicle is an invitation for
thieves. Always remove key fob from the
vehicle and lock all doors when leaving the
vehicle unattended.
WARNING! (Continued)
1 — OFF
2 — ON/RUN
3 — START
21_M6_OM_EN_IN_t.book Page 27

Table of Contents

Other manuals for Jeep Compass

Related product manuals