IN CASE OF EMERGENCY 299
placed in position, rotate it clockwise to lock
it in. Replace the alignment pin in the center
hole to lock the jack in place.
EC DECLARATION OF CONFORMANCE
1. The undersigned,
Jaswant Singh
,
representing the Moonlight Tools Pvt. Ltd.,
herewith declares that the machinery
described below fulfills all the relevant
provisions of:
The EC-directive 2006/42/EC on
Machinery
2. Description of machinery.
Generic Denomination: Pantograph jack
Function: Lifting Motor Vehicle
3. Manufacturer Detail
Moonlight Tools Pvt. Ltd.
Vill. Jaspalon, G.T. Road Doraha
Distt. Ludhiana (141421) Punjab (India)
Teh. PH. No. 01628 258302
4. Authorized Person to compile the technical
file
Mr. jaswant Singh DGM (QA & Dev.)
Moonlight Tools Pvt. Ltd.
Ludhiana
5. Reference standard : PF-90065
NOTE:
This declaration becomes invalid, if technical or
operational modifications are introduced
without the manufactures consent. Follow oper-
ational manual and instructions for use.
WARNING!
A loose tire or jack thrown forward in a colli-
sion or hard stop could endanger the occu-
pants of the vehicle. Always stow the jack
parts and the spare tire in the places pro-
vided. Have the deflated (flat) tire repaired or
replaced immediately.
Model
Code
Model
Name
Type
Working
load
M6 (556) MPV MLF1 1250Kg
Date Place Signature Seal
29–03–
2017
Doraha
Ludhiana
21_M6_OM_EN_IN_t.book Page 299
To Next Page
Loading...
