GETTING TO KNOW YOUR VEHICLE 39
MANUAL ADJUSTMENT (REAR SEATS)
60/40 Split Folding Rear Seat With
Fold-Flat Feature
To provide additional storage area, each rear
seat can be folded flat. This allows for extended
cargo space and still maintains some rear
seating room.
NOTE:
Prior to folding the rear seat, it may be neces-
sary to position the front seat to its mid-track
position. Also, be sure that the front seats are
fully upright and positioned forward. This will
allow the rear seat to fold down easily.
To Lower The Rear Seat
1. Pull the seatback release lever located on
either side of the upper outer edge of the
seat.
Rear Seat Release Lever
2. Fold that side of the rear seatback
completely forward.
WARNING!
Adjusting a seat while the vehicle is moving is
dangerous. The sudden movement of the
seat could cause you to lose control. Adjust
any seat only while the vehicle is parked.
WARNING!
Do not pile luggage or cargo higher than the
top of the seatback. This could impair
visibility or become a dangerous projectile in
a sudden stop or collision.
WARNING!
It is extremely dangerous to ride in a cargo
area, inside or outside of a vehicle. In a
collision, people riding in these areas are
more likely to be seriously injured or killed.
Do not allow people to ride in any area of
your vehicle that is not equipped with seats
and seat belts.
Be sure everyone in your vehicle is in a seat
and using a seat belt properly.
1 — Seat Belt Guide
2 — Seatback Release Lever
21_M6_OM_EN_IN_t.book Page 39
To Next Page
Loading...
