48 GETTING TO KNOW YOUR VEHICLE
OUTSIDE MIRRORS
The outside mirror(s) can be adjusted to the
center of the adjacent lane of traffic to achieve
the optimal view.
NOTE:
The passenger side convex outside mirror will
give a much wider view to the rear, and espe-
cially of the lane next to your vehicle.
POWER ADJUSTMENT MIRRORS
The power mirror control switch is located on
the driver's side door trim panel.
To adjust a mirror, rotate the control switch to
the mirror you want to adjust (L) or (R). Then
push the switch in the direction that you want
the mirror to move.
Power Mirror Switch
NOTE:
Once adjustment is complete, rotate the knob
to the neutral position to prevent accidental
movements.
Power Folding — If Equipped
To fold the door mirrors in using the Power
Folding Mirror function, rotate the control
switch to the power folding position. Rotating
the control to the left, right, or neutral position
will return the mirrors to the driving position.
If the power mirror control switch is moved
again during door mirror folding (from closed to
open position and vice versa), the movement
direction is reversed.
WARNING!
Vehicles and other objects seen in the
passenger side convex mirror will look smaller
and farther away than they really are. Relying
too much on your passenger side convex
mirror could cause you to collide with another
vehicle or other object. Use your inside mirror
when judging the size or distance of a vehicle
seen in the passenger side convex mirror.
1 — Neutral Position
2 — Left Mirror
3 — Control Switch
4 — Right Mirror
5 — Power Folding Position (If Equipped)
21_M6_OM_EN_IN_t.book Page 48
To Next Page
Loading...
