EasyManuals Logo

Jeep Compass User Manual

Jeep Compass
503 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #114 background imageLoading...
Page #114 background image
Recommendations For Attaching Child Restraints
Restraint Type Combined Weight
of the Child + Child
Restraint
Use any attachment method shown with an “X” Below
LATCH Lower
Anchors Only
Seat Belt Only LATCH Lower
Anchors + Top
Tether Anchor
Seat Belt + Top
Tether Anchor
Rear-Facing Child
Restraint
Up to 65 lbs
(29.5 kg)
XX
Rear-Facing Child
Restraint
More than 65 lbs
(29.5 kg)
X
Forward-Facing Child
Restraint
Up to 65 lbs
(29.5 kg)
XX
Forward-Facing Child
Restraint
More than 65 lbs
(29.5 kg)
X
Lower Anchors And Tethers For CHildren
(LATCH) Restraint System
Your vehicle is equipped with the child restraint
anchorage system called LATCH, which stands
for Lower Anchors and Tethers for CHildren. The
LATCH system has three vehicle anchor points
for installing LATCH-equipped child seats.
There are two lower anchorages located at the
back of the seat cushion where it meets the
seatback and one top tether anchorage located
behind the seating position. These anchorages
are used to install LATCH-equipped child seats
without using the vehicle’s seat belts. Some
seating positions may have a top tether anchor-
age but no lower anchorages. In these seating
positions, the seat belt must be used with the
top tether anchorage to install the child restraint.
Please see the following table for more
information.
LATCH Label
111

Other manuals for Jeep Compass

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Jeep Compass and is the answer not in the manual?

Jeep Compass Specifications

General IconGeneral
BrandJeep
ModelCompass
CategoryAutomobile
LanguageEnglish

Related product manuals